Description
Chlorin C Granulat is a rapidly soluble, inorganic chlorine granulate for the short-term increase of the chlorine value or as a permanent disinfectant with immediate effect against bacteria, fungi, viruses and for the degradation of turbidity and organic impurities in swimming pool water. Contains lime, soluble with low residue. Complies with DIN 19643 and § 11 of the Drinking Water Ordinance. Particularly suitable for soft water and for correcting / shock chlorination of pools treated with organic products. Dosage:
Initial addition: 80 g Chlorin C granules per 10 m³ of pool water. After high chlorination, swimming operations should be discontinued until the optimum chlorine value is reached. Weekly subsequent dosing: approx. 50 g per 10 m³ of pool water. The optimum free chlorine value for permanent disinfection is in the range of 0.3-0.6 mg/l. Important: Always dissolve the product in a clean bucket filled with clean water before adding! To avoid bleach stains and other surface damage, do not dose directly into the pool. The basis for effective and efficient water disinfection is a pH value in the range 6.8-7.4. High temperatures, storms and increased frequency of use may require higher dosing quantities, high chlorination and the use of algicides: approx. 150 g Chlorin C granules / 10 m – if necessary, supplement with 200 ml Algenin Top / 10 m³. After adding water treatment chemicals, it is recommended to circulate the water for at least two hours. In the case of high chlorination with 3 mg/l free chlorine and higher, swimming must be discontinued. Storage:
Store in the sealed original container at room temperature, dry and as well ventilated as possible. Protect from direct sunlight and overheating. Protect from unauthorized access. Observe regulations for the storage of chemicals. Never mix with other chemicals or organic chlorine products.
Data sheets available on request! Always read the label and product information before use!
- Safety data sheet
- Product data sheet
